51 C
Profiled aluminum slat in 51 mm filled with polyurethane.
TECHNICAL DATA
0,30 mm
9,5 mm
51 mm
19,6
0,138 Kg/m | 2,702 Kg/m²
min. 4 m | max. 7 m
6 m
44
264 m/pack
COMPATIBLE
SIDECAP
SIDECAP 51C
ref:2331
COMPATIBLE
END SLAT
50 ER2
COMPATIBLE
RUBBER
RUBBER 3x5,2
ref: 1733
(With this rubber, the slat acts as end slat)
COMPATIBLE
GUIDES
Guides with interior gap width between 14 and 16 mm. With brush 7x5 mm. (ref: 59333)
For inlay guides use brush 3,8x5 mm. (ref: 39579)
COMPACT ROLLINGS
ENROLLAMIENTO DE COMPACTOS
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| CAJÓN ALUMINIO |
137 | 1180 | 1080 | 1030 | |
| 150 | 1500 | 1400 | 1400 | ||
| 165 | 1960 | 1810 | 1560 | ||
| 180 | 2180 | 2280 | 2230 | ||
| 205 | 3360 | 3260 | 3050 | ||
| 250 | 5580 | 5370 | 5270 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| LUXEBOX SUBLIBOX |
155 | 1350 | 1240 | 1090 | |
| 185 | 2180 | 2180 | 2080 | ||
| 215 | 3370 | 3260 | 3060 | ||
| 245 | 4860 | 4170 | 4600 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| D. TABIQUE | 155 | 1350 | 1240 | 1090 | |
| 185 | 2180 | 2180 | 2080 | ||
| 200 | 2250 | 2150 | 2000 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| ARTBOX | 155 | ABC | 1000 | 950 | 850 |
| D | 800 | 900 | 1000 | ||
| 185 | ABC | 1890 | 1780 | 1630 | |
| D | 1680 | 1580 | 1480 | ||
| 220 | ABC | 2980 | 2930 | 2830 | |
| D | 2770 | 2620 | 2520 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| ARTBOX PREMIUM |
155 | ABC | 1000 | 950 | 850 |
| D | 800 | 900 | 1000 | ||
| 185 | ABC | 1890 | 1780 | 1630 | |
| D | 1680 | 1580 | 1480 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| RT-BOX | 155 | ABC | 1000 | 950 | 850 |
| 185 | ABC | 1890 | 1780 | 1630 | |
| D | 1480 | 1380 | 1330 | ||
| 200 | ABC | 2150 | 2050 | 1950 | |
| D | 1640 | 1590 | 1490 | ||
| 220 | ABC | 2980 | 2930 | 2830 | |
| D | 2160 | 2010 | 1860 | ||
The indicated heights (expressed in mm) include the box and the end slat, that is, they are refered to the shutter hollow. These heights are orientative, taking account on the particular conditions of each case.
ROLLINGS DIAMETERS
|
|
AXIS |
||
|
CURTAIN HEIGHT |
40 |
50 |
60 |
|
1,00 |
140 |
150 |
155 |
|
1,20 |
145 |
150 |
155 |
|
1,40 |
155 |
165 |
170 |
|
1,60 |
160 |
165 |
170 |
|
1,80 |
170 |
180 |
180 |
|
2,00 |
170 |
180 |
185 |
|
2,20 |
180 |
190 |
185 |
|
2,40 |
185 |
195 |
200 |
|
2,60 |
195 |
195 |
200 |
|
2,80 |
200 |
205 |
210 |
|
3,00 |
205 |
210 |
215 |
|
3,20 |
205 |
215 |
215 |
|
3,40 |
210 |
220 |
220 |
|
3,60 |
215 |
225 |
225 |
|
3,80 |
220 |
230 |
225 |
|
4,00 |
225 |
235 |
235 |
|
4,20 |
230 |
235 |
240 |
|
4,40 |
235 |
240 |
245 |
|
4,60 |
240 |
250 |
250 |
*Data (expressed in mm) indicate rolling diameter.
RESISTANCE TO WIND CHARGE CLASSIFICATION
*Wind resistance classification according to UNE EN 13659:2016. Wind resistance tests performed according to UNE EN 1932: 2014; “Resistance to wind charges”.
